The 1F is a voltage controlled switch, intended to be ‘one friend’ for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v/oct signals. More detailed info on the demo video.
Technical specifications:
• 4HP.
• 27 mm depth.
• Consumption: 15mA +12V; 10mA -12V.
Module available here.
Build document here.
1F on Modular Grid.
The 2M is a dual three channel mixer in 6 HP with volume controls over all the inputs as well as the final output. As its design has been specially focused on audio applications, the input potentiometers are audio-taper type while the output ones are linear. Low distortion / high quality audio operational amplifiers have been selected in order to achieve clean audio mixing, but is also DC-coupled, so it can perform CV signal mixing as well. Great for a small system, allowing for submixes or even stereo mixing.
Technical specifications:
• 6HP.
• 38 mm depth.
• Consumption: +/-12V 20mA.
Module available here.
Build document here.
2M on Modular Grid.
The 4R is a quad random voltage generator in 2HP. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 random values with just one trigger. The voltage range of each pair of outputs can be set as unipolar (0V to +5V) or bipolar (-5V to +5V).
Technical specifications:
• 2HP.
• 50 mm depth.
• Consumption: 60mA +12V; 40mA -12V.
4R on Modular Grid.
Module available here.
Build document here.
The 7J is a compact joystick controller module. For each axis the joystick can work as an attenuator or attenuverter, selectable via unipolar or bipolar mode switches. The inputs (normalled to +5V) have dedicated attenuators and both X and Y outputs are equipped with continuously variable offset control (-5 to +5V) for fine-tuning the voltage ranges independently. The 7J also has a manual gate generator on board. The joystick itself is without an auto-return to centre spring, perfect for hands-on expression and playful interaction.
Technical specifications:
• 8HP.
• 38 mm depth.
• Consumption: 35mA +12V; 25mA -12V.
7J on Modular Grid.
Module available here.
Build document here.
The 8S is an 8 step sequencer in 8 HP with control over some parameters of the sequence as reset, hold, random step and direction. The inputs have been designed to work with clock related signals like triggers or gates but any type of CV signal can be used. The output signal path is completely analog and its range can be set to unipolar (0 to +5 volts) or bipolar (-5 to +5 volts) via jumper on the back of the module.
Technical specifications:
• 8HP
• 38 mm depth
• Consumption: +12V: 25mA ; -12V: 5mA.
Module available here.
Build document here.
8S on Modular Grid.