The u1P is a Bernoulli gate. Based on the probability set by the potentiometer, it randomly routes a trigger or gate signal sensed at the input to either of its two outputs. Having three different operating modes (direct, toggle, single), it becomes a useful tool for adding spice and variety to your drum beats or sequenced gates.
Technical specifications:
• 10HP, Intellijel 1U size.
• 30 mm depth.
• Consumption: 15mA @ +12V; 0mA @ -12V.
User manual here.
u1P on Modular Grid.
Build document here.
Module available here.
The u2X is a dual buffered multiple with bicolor leds for monitoring signals. Each input is copied into three outputs. As the top section is normalled to the bottom section it’s also possible to get 6 copies of the same signal.
Technical specifications:
• 12HP, Intellijel 1U size.
• 20 mm depth.
• Consumption: 20mA +12V; 20mA -12V.
u2X on Modular Grid.
Build document here.
Module available here.
The u3A is a three channel attenuverter useful for scale, add offset, invert or sum signals. As each input is normalled to +5V, with nothing plugged into the jacks, each knob controls a voltage range from -5V to +5V. Each output is also summed to the adjacent channel on the right when no cable is connected.
Technical specifications:
• 18HP, Intellijel 1U size.
• 30 mm depth.
• Consumption: 30mA +12V; 30mA -12V.
u3A on Modular Grid.
Build document here.
Module available here.
The u4R is a 1U adaptation of the 3U module 4R. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 random stepped values with just one trigger. The voltage range of each pair of outputs can be set as unipolar (0V to +5V) or bipolar (-5V to +5V).
Technical specifications:
• 10HP, Intellijel 1U size.
• 31 mm depth.
• Consumption: 60mA +12V; 40mA -12V.
u4R on Modular Grid.
Module available here.